CREATOR 8 inch touch screen CR-Wireless G7Cpip - Manual (Page 14)

CREATOR CHINA 2012-11 WWW. CREATOR1997.COM
8 Handheld Wireless Programmable Touch Screen User's Manual
Figure 2-10
5,tap the icon button at the right lower
corner to return to the main page.
2.2.4 Volume&Power
Figure 2-11
As shown in Figure 2-11, this is power
management page for the adjustment of touch
screen’s sound , backlight, turn off the backlight
time to enter standby time , display battery level
and whether a battery is installed, whether it is
charging with external power supply.
1,Drag bars in Volume option can adjust the
sound.
2,Drag backlit scroll bar in Backlights option to
adjust the brightness of the backlight.
3,Click Turn off LCD to turn off the digital area of
the backlight time, the pop-up adjustment pulley
is used to adjust the time to turn off the backlight
(0,5-60 seconds), 0 means do not turn off the
backlight, the minimum can only be set to five
seconds, stands for Closing LCD in five seconds,
the effect was shown in Figure 2-12,
Figure 2-12
4,click on the TurnTo Standby, digital area of
standby time, pop-up adjustment pulley is used to
adjust the standby time (0-60 minutes),
The initial value is 8 minutes, i.e.8 minutes later,
the touch screen will go to sleep.
The setting of 0 indicates no standby.
5, when the percentage of power displays as 0%,
suggests that there is no battery connection
currently. Other values stand for the current
percentage of battery power.
6, as the green battery shown in the right side,
when the battery is static, representing the
corresponding
battery power. Dynamic, it
indicates that external power is currently being
used, the icon is displayed at the same time
in the "Remaining Capacity" column.
7,click the icon button in the right lower
corner to return to the main page.