COWON iAUDIO 10 - Manual (Page 22)

22 iAUDIO 10
and this may cause corruption of some special fonts
or languages on the display.
+ Computer cannot recognize the player when
connected.
If you cannot turn on the device or the device
is not recognized by the PC after connecting the
device, unplug the device from the PC and reset
it by simultaneously holding both the - and +
volume buttons for approximately 4 seconds. If the
connection is unstable and the device is repeatedly
disconnected, plug the device into a USB port
connected directly to the motherboard of the PC. If
your PC does not recognize iAUDIO 10 because the
device is out of battery power, recharge the device
or connect it to a power source before reconnecting
it to your PC. After connecting the device to
your PC, the CHARGE+PLAY menu may continue
charging iAUDIO 10 without recognizing it as a USB
device. If this occurs, select the CHARGE+SYNC
menu for USB connections.
+ Memory capacity of the player is different or
smaller than specified.
The memory capacity indicated by Windows may
be different from that indicated by the memory
manufacturer. The actual capacity will be reduced
from the original size because some space of the
memory should be used as the system area for
normal operation.
+ The player does not play properly when memory
is full.
For the player to function properly, it requires at
least 10 MB of space for saving settings and other
system files.
+
‘EJECT’ procedure must be performed before
removing the device from the PC. The device can
malfunction with MAC OS 10.5 Leopard version or
later. If the device shows a problem, format it as
FAT and install the latest firmware.
+ Troubleshooting