COWON iAUDIO 10 - Manual (Page 11)

11 iAUDIO 10
1. Use the USB cable to connect iAUDIO 10 to the PC.
2. Tap the Touchpad and choose CHARGE + SYNC.
* Choose CHARGE + PLAY for charge/play mode. This mode
disables the USB connection to the PC.
3. Also make sure to check My Computer or Windows
Explorer to see if iAUDIO 10 is properly connected
to the PC.
4. Copy desired video, music, or other files to iAUDIO 10.
5. When done, click the
icon on the system tray to
safely remove iAUDIO 10 from the PC.
6. Click the popup message.
7. Safely remove the hardware and disconnect the
USB cable.
- This device can recognize up to 12,000 folders,
and up to 12,000 files (up to 8,000 music/video files and up to
4,000 files of other supported formats).
- Disconnect the product after performing “Safely Remove
Hardware” function.
- The following message may appear randomly, but it does not
indicate that the product is malfunctioning. Please try again.
- If your operating system does not display the ‘Safe To Remove
Hardware’ window, disconnect the player after all transfer
operations are completed.
- Only simple file transfer operation is available for Linux and
Mac OS.
-
‘EJECT’ procedure must be performed before removing the device
from the PC. The device can malfunction with MAC OS 10.5
Leopard version or later. If the device shows a problem, format it
as FAT and install the latest firmware.
+ Connecting and Disconnecting the PC
Before you start!