COWON iAUDIO 10 - Manual (Page 10)

10 iAUDIO 10
1. Power On/Off : Press and hold to turn the device on or off.
2. Hold On/Off : Press briefly to activate or deactivate Hold
mode.
- The Touchpad and buttons will not respond while in
Hold mode in order to prevent malfunctions due to
unintentional operation.
- SETTINGS The Settings for General Hold/Button Use
can be modified in the System menu.
- While in Hold mode, the Volume buttons will perform the
FF/Rew functions. You may choose the functions controlled
by the volume buttons.
3. Volume (-/+): Lowers or raises the volume.
* Smart RESET: If a button or the touchpad is not working
correctly, simultaneously press and hold both - and +
buttons for approximately 4 seconds to reset the device.
This reset only shuts off power in case of a device
malfunction and does not affect the device's performance.
* The iAUDIO 10's default Power Off setting is Sleep mode,
which consumes very little power.
+ Buttons
Before you start!
+ Charging
Before you start!
1. Connect between PC and USB /AV port using USB cable.
The battery will be fully charged in about 2 hours.
2. Charging by COWON approved AC adapter: The battery will be fully
charged in about 2 hours.
- When charging the player for the first time or the player has
not been charged for an extended time, fully charge the battery
before use.
- iAUDIO 10 has a built-in Lithium Polymer battery. To prolong the
life of the battery, it is recommended that you charge the device
frequently, as opposed to fully discharging and then charging
the device.
- When connected to a USB hub, the player may not charge properly.
Please try connecting the player directly to a USB port on the PC.
- For safety during charging, use USB cable approved by COWON
SYSTEMS, Inc.
PC
PC
1 2