ConnectGear WA660N - Manual (Page 41)

34
able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this access point,
select 2.4GHz (B+G+N).
Channel Number Please select a channel number you wish to use.
The channel number must be same with another
wireless access point you wish to connect
MAC address 1-4 Please input the MAC address of the wireless
access point you wish to connect
Set Security Click this button to select an encryption mode for
this wireless link, a new popup window will
appear. Please refer to Section 2-7 for detailed
descriptions.
After you finish with setting, please click ‘Apply’, and the following
message will be displayed:
When you see this message, the settings you made is successfully save.
You can click ‘Continue’ button to back to previous page and continue on
other setting items, or click ‘Apply’ button to restart the wireless access
point and the changes will take effect after about 30 seconds.