ConnectGear WA660N User Manual
Page 16

9
2-2 Connecting to wireless access point by web browser
After the network connection is built, the next step you should do is
setup the access point with proper network parameters, so it can work
properly in your network environment.
Please use the web browser to configure the access point. A computer
with wired Ethernet connection to the access point is required for this
first-time configuration.
Before you staring to configure the access point, please configure the IP
address of the computer in the same network segment with the access
point.
If the operating system of your computer is….
Windows 95/98/Me
- please go to section 2-2-1
Windows 2000
- please go to section 2-2-2
Windows XP
- please go to section 2-2-3
Windows Vista
please go to section 2-2-4
2-2-1 Windows 95/98/Me IP address setup
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.