Comtech EF Data CIC-35 LVDS to ASI - Manual (Page 8)

CIC-35 LVDS to ASI Interface Converter Revision 0
MN/CIC35.IOM
vi
T
ELECOMMUNICATIONS
T
ERMINAL
E
QUIPMENT
D
IRECTIVE
In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC,
this equipment should not be directly connected to the Public Telecommunications
Network.
EMC (E
LETROMAGNETIC
C
OMPATIBILITY
)
(PRELIMINARY) The CIC-35 is designed to comply with the following standards:
Emissions: EN 55022 Class B – Limits and methods of measurements of radio
interference characteristics of Information Technology Equipment.
FCC Part 15 Class B
Immunity: EN 50082 Part I – Generic immunity standard, Part I: Domestic,
commercial, and light industrial environment.
In order that the CIC-35 continues to comply with these standards, observe the following
instructions:
The equipment must be operated with its cover on at all times. If it becomes
necessary to remove the cover, the User should ensure that the cover is correctly re-
fitted before normal operation commences.
The converter box must have good mechanical contact with the metal chassis of the
CDM-600/600L modem.