Comtech EF Data CIC-35 LVDS to ASI - Manual (Page 11)

CIC-35 LVDS to ASI Interface Converter Revision 0
MN/CIC35.IOM
2
Chapter 2. INSTALLATION
Power down the modem before installing the converter box and remove any coaxial
cables attached to the converter box.
Remove the four Philips head screws on the sides, and lift the cover off the CIC-35.
Attach the CIC-35 to the CDM-600/600L by mating the two pairs of 25-pin D-subs
together, then tighten the four captive screws (refer to the picture below).
Re-attach the cover and replace the four Philips head screws. The metal surfaces of the
modem and the CIC-35 should be flush.
2.1 CONNECTOR OVERVIEW
The rear panel connectors provide all the necessary external connections between the
modem and other equipment. Refer to the CDM-600/600L manual for more information.