Compuprint 9058 - Manual (Page 43)

37
Setting the Interface Parameters
Interface Type
PRINT OUT? NO PARALL INTERFACE
↓ ↑
PARALL INTERFACE → 1284 BIDIR I/F → or ←
CX PARALLEL I/F → or ←
↓ ↓
SERIAL INTERFACE SELECT-IN HOST
1284 BIDIR I/F Bidirectional IEEE 1284 parallel interface.
CX PARALLEL I/F Centronics type parallel interface (monodirectional)
Setting the Select-In Signal
1284 BIDIR. I/F
↑
SELECT-IN HOST → or ←
SELECTIN ON → or ←
↓
DATA BITS 8
SELECT-IN ON The SELECT-IN signal of the parallel interface is ignored and treated always as
ON.
SELECT-IN HOST The printer checks the SELECT-IN signal coming from the host.