Compuprint 9058 - Manual (Page 108)

102
3. Insert a cut sheet along the left paper
guide. Match the right paper guide with
the sheet margin.
4. The loading mode of the cut sheet depends on the value set for the QUICK function in the
Power-On Configuration:
Manual loading mode
(QUICK NO) Make sure that the printer is disabled. Insert a cut sheet onto the
front paper support and press the
LOAD/FF key to feed the paper.
Press the ON LINE key to enable the printer.
Automatic loading mode
(QUICK YES) Insert a cut sheet onto the front paper support, the paper will be
loaded automatically after 2 seconds. The
LOAD/FF key can be used
to load the paper into the printer, before the 2 seconds have passed.
5. To lower the paper feed support, free the
paper support holder below the support
and replace the support in its initial
position.