Datalogic Scanning 9500 - Manual (Page 336)

6-220
Magellan ® 9500
EAN-128 AIM ID
This feature enables/disables transmission of the EAN-128 AIM symbol-
ogy identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-128 AIM ID = DISABLE
EAN-128 AIM ID = ENABLE