Compuprint 4247-L03 Quick Start - Manual (Page 26)

7. Match the left sprocket for the first printing position, that is the left margin
must match the ninth mark on the printer cabinet.
Note: Aligning the left-hand edge of the paper past the 22 nd spacer on the
printer cabinet will cause the paper to be misaligned with the Paper
Load Sensor resulting in a '001 End of Forms' error.
8. Adjust the right sprocket gently to remove slack from the paper. Lock the left
and right sprockets moving the sprocket levers to the up position.
9. Close the Push tractors cover.
1 2 3 4 5 6 7 8
9
HC0I0023
Figure 19. Matching the left sprocket for the first printing position.
HC0I0025
Figure 20. Adjusting the right sprocket gently to remove slack from the paper.
18 Quick Setup Guide