Compuprint 4247-L03 Quick Start - Manual (Page 12)

Removing the Shipment Locks
Open all the printer covers and make sure that you remove all the shipment locks
from the printer.
The following sections describe how to install the Operator Panel Overlay, the
ribbon cartridge, and the Controller Board.
Installing the operator panel overlay
1. Remove the paper backing from the back of the overlay.
2. Carefully align the overlay ensuring free movement of the operator panel keys.
3. Press the overlay in place starting at the bottom , and continue working
upwards until the overlay is pressed into place.
Figure 4. Printer showing location of the Shipment Locks
Figure 5. Operator Panel
4 Quick Setup Guide