Choosing a suitable location – Compuprint 4247-L03 Quick Start User Manual
Page 11
Choosing a Suitable Location
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
Consider the following points when you choose the location for your printer:
v
The distance between the printer and the host computer must not exceed the
length of the interface cable. The location must be sturdy, horizontal and stable
v
Your printer must not be exposed to direct sunlight, extreme heat, cold, dust or
humidity (see “Printer Specifications” in the User's Guide you find on the
CD-Rom)
v
You need a power outlet compatible with the plug of the printer's power cord.
v
For best continuous forms stacking, the forms should be stacked on the floor or
on a surface below the base of the printer.
v
For successful forms parking, the input forms stack must always be lower than
the base of the printer.
v
There must be sufficient clearances on all sides for easy operation. The required
space is shown in the following figure:
80 cm
31.5 in.
20 c
m
7.9
in
10
0
cm
39
.4
in
20 c
m
7.9
in
1
00
cm
39
.4
in
Hc0i0005
Figure 3. Printer showing dimensions in inches and centimeters.
Setting up your printer
3