Compuprint 10300 - Manual (Page 60)

56
Setting the Parallel Interface Parameters
Interface Type
INTERFACE PARALL INTERFACE
↑ ↑
PARALL INTERFACE → 1284 BIDIR. I/F → or ←
↓ CX. PARALLEL I/F → or ←
SERIAL INTERFACE ↓
SELECT-IN HOST
1284 BIDIR. I/F
Bidirectional IEEE 1284 parallel interface.
CX. PARALLEL I/F
Centronics type parallel interface (mono-directional).
Setting the Select-In Signal
1284 BIDIR . I/F
↑
SELECT-IN HOST → or ←
SELECT-IN ON → or ←
↓
DATA BITS 8
SELECT-IN HOST
The printer checks the SELECT-IN signal coming from the host.
SELECT-IN ON
The SELECT-IN signal of the parallel interface is ignored and treated always
as ON.