Compuprint 10300 User Manual
Page 138
12. If installed, reposition the Front2 tractor
in its initial position.
13. If your printer is installed on a table,
position the paper staple so that the paper
is freely fed into the printer.
If your printer is installed on the optional
printer cabinet, open the printer cabinet
door and lay the paper staple onto the shelf
inside the printer cabinet:
• Onto the lower shelf if you are using only
one paper staple. The paper must be fed
in front of the antistatic cable;
• Onto the upper shelf if you are going to
install a second paper staple. The paper
must be fed behind the antistatic cable.
14. Close the printer cabinet door and the
tractor area cover.
Antistatic cable
134