Compuprint 10300 User Manual
Page 21
9. Turn again the ribbon-winding knob in the arrow direction (located on the cartridge) to take
up slack in the ribbon.
10. Push the cartridge down gently until it clips into place at locking points.
11. Turn the ribbon-winding knob again in the direction of the arrow to take up slack in the ribbon.
12. To ensure that the ribbon guide runs freely along the ribbon, manually move the print carriage
horizontally.
If the used ribbon cartridge needs to be replaced, see "
Replacing The Ribbon Cartridge
", later in this
manual.
17