Coloronix 12″ Linear RGB Stick - Manual (Page 14)

Page 14 – Coloronix RGBW Modular Lighting Manual V.2.2
Further Troubleshooting
Should problems occur while using the product, unplug it at once and contact:
Coloronix, Inc.
Tech Support: (909) RGBW-555
[email protected]
Replacing a Failed Fixture
If a fixture needs to be replaced, the steps are as follows:
1. Disconnect the DMX input at the junction box of the fixture needing
replacement.
2. Disconnect DMX output.
3. Replace fixture.
4. Reconnect AC negative.
5. Reconnect AC positive.
6. Reconnect DATA output.
7. Reconnect DATA input.
8. Reconnect power.
9. Make sure the replaced fixture and the entire system is in working order.