Installing mini data enabler – Coloronix 12″ Linear RGB Stick User Manual

Page 10

background image

Page 10 – Coloronix RGBW Modular Lighting Manual V.2.2

Installing Mini Data Enabler

1. Mount miniature data enabler using a steel L-bracket.

Note: Install in a location with air circulation.

2. Connect appropriate wires of RGB/RGBW LED modules to screw terminal

blocks.

3. Connect appropriate 24VDC power to screw terminating block.

This manual is related to the following products:

48″ Linear RGB Stick 12″ RGB Square Module 12″ RGBW Square Module 2″ Square Module 4 Channel Miniature Data Enabler 8″ Square Module 5′ Linear RGBW Strip