Code Blue IA500-S SINGLE BUTTON ANALOG SURFACE MOUNT - Manual (Page 3)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-144-E page 3 of 17
IA500
Administrator Guide
2 Introduction
Thank you for choosing the Code Blue InterAct 500 series analog speakerphone(s), intercom(s)
and paging device(s) for indoor and outdoor applications. These speakerphones are part of our
Emergency Signaling group of products that are built to meet the latest regulations, withstand the
harshest elements and be proactive solutions for when you need them most. The InterAct 500
series phones meet the need for a cost effective, highly reliable product for multi-level parking
decks, stairwells, hallways and building entrances.
Note: Only recommended for use on Bell POTS lines or dial tone provided by ToolVox ® ; locations with
private PBX head end phone systems should explore the rest of Code Blue’s speakerphone options.
The InterAct 500 is a series of line powered speakerphones – IA500-d, IA500-s, IA501-d and
IA501-d – featuring piezoelectric touch sensitive buttons, a waterproof speaker and microphone,
and one latching type auxiliary relay output. The units include remote programming, call in
monitoring for Areas of Rescue functionality and live audio setup programming.
These line-powered phones feature single or dual solid-state button activation, two high intensity
LED indicators, a cast metal bezel assembly and stainless steel housings for surface or flush mount
applications.
The InterAct 500 series has conformal-coated electronics to support both indoor and outdoor
installations. Each model includes a built-in contact closure that may be used to activate a strobe or
camera or can be used for door access applications.
The two-piece housing on the surface mount models allows the back plate to be mounted and pre-
wired during the rough-in phase and the faceplate/electronics assembly set in place near the end of
the project. The flush mount version includes the flush mounting box and has an oversized faceplate
to eliminate additional trim work.
Accessories include blue beacon lighting, remote mount strobes, identification signage and curb
mount pedestals to support a wide range of installations.
This guide provides basic and advanced programming information for obtaining the best
performance with the InterAct 500 speakerphone.
IA500-d Dual Button Surface Mount
IA501-d Dual Button Flush Mount
IA501-s Single Button
Flush Mount
IA500-s Single Button
Surface Mount