Code CR4100 Quick Start - Manual (Page 10)

C006244_01_CR4100_QuickStart_Guide 6
1. Click the Windows START icon on the upper left portion of the screen on the
CR4100 (Figre 14).
2. Click on Cortex Mobile (Figure 15), you may need to scroll down through the
icons to find Cortex Mobile. Cortex Mobile is the bar code reader configuration
tool.
3. You will see a pop-up which states “Initializing Scanner” (Figure 16).
4. After the pop-up disappears, you will see a Data Matrix icon in the lower right
hand corner of the screen (Figure 17).
3.0 - Configuring the CR4100 Bar Code Reader using Cortex™ Mobile
2.12 - Inserting a SIM Card
1. Follow the instructions for Removing the Battery in Section 2.1 of this QuickStart
Guide.
2. The SIM card socket is located in the battery compartment (Figure 13).
3. Insert the SIM card into the socket as shown in the diagram on the right of the
socket.
4. Follow the instructions for Inserting the Battery in Section 2.0 of this QuickStart
Guide.
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17