10 - lock-out link mode – Code CR2500 User Manual

Page 51

C004386_07_CR2500_ User_Manual -

Save Settings

To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read
the following code:
Reader ID and Firmware

You will see a text string indicating your firmware version and CR2500 ID number (see below):

Xap/i - Code Internal ID (not applicable)

VVVV is the application firmware version number

WWWW is the bootloader firmware version number

XXXX is the radio firmware version number

SSSSSSSSSS Reader’s serial number (ten digits)

P is “A” if running firmware is the application, “B” if BootLoader

XXX-XX+XX - Internal ID (not applicable)

Example:

Xap/i3000300006040010002363A06D-SD+SQ

Note: Code will periodically release new firmware for CR2500 readers. For information on latest firmware versions, call
Code at (801) 495-2200. To upgrade firmware, please visit our website at

http://www.codecorp.com/codesupport.php

and follow instructions provided.

4.8 - Reader ID and Firmware Version

4.9 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:
Reader Settings Locked

Reader Settings Unlocked

Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX

This mode can be used to establish a permanent connection between the reader and a CodeXML® modem. Prepare the
reader to communicate in ‘RF Comm Mode’ by scanning the QuickConnect code on the paired modem to which you wish
to establish a permanent link. Listen for the single beep to verify the connection acknowledgement. Scan the Lockout Link
Mode code (see below). Set appropriate timeout settings, if applicable (see Section 1.4.4).

To reassign a permanent connection to a different reader, scan the unlock link code. Using the ‘new’ reader’ follow the
directions outlined in the previous paragraph.

4.10 - Lock-out Link Mode

NOTE: Prefix and Suffix programming
codes, memory transfer and delete
commands, “Clear All CodeXML®
Rules” and “Suffix -Erase/None”
commands are not locked by this
feature.

Lockout Link Mode

Unlock Link Mode