beautypg.com

Code CR2500 User Manual

Page 27

background image

C004386_07_CR2500_ User_Manual -

21

Save Settings

1.8.9 - Configuration for Microsoft Bluetooth Stack Instructions

(continued)

2a.

Go to

http://www.codecorp.com/bdaddr.php and create a QuickConnect code using the address from step

Use the CodeXML® Router/ 2-way applications section if CodeXML® Router will be installed, otherwise create

a QuickConnect Code using the section for Serial Applications.

3.

Under “COM Ports” tab, select “Add”. In Add COM Port dialog box, select Incoming, click OK. Windows Installs

driver and create a Bluetooth COM Port. Note the COM port number.

4.

Install the CodeXML® Router Software to the Device on the Appropriate COM Port. Reboot the PC and then

scan your QuickConnect code to connect. Please note that the Window Stack does not allow a device to

connect until the Com Port is opened. CodeXML® Router must be installed or the serial application must be

started before the QuickConnect Code is read.

5.

Scan the QuickConnect Code generated in step 3. Windows will prompt for a Passkey. The default Passkey

is “12345678”.