Denon AVR-3801 User Manual

Page 56

• Operating the surround mode and surround parameters from the main unit‘s panel.

Turn the SELECT knob to select the surround mode.

SELECT

• When turned clockwise

• When turned counterclockwise

Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 57.)

SURROUND

PARAMETER

Display the parameter you want to adjust, then turn the SELECT knob to set it.

(Main unit)

To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
then operate the selector.

NOTE:

• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC, DTS NEO:6 modes and the input signal switches to a digital

signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode
automatically switches to DTS surround.

SURROUND

MODE

(Main unit)

DIRECT

STEREO

DOLBY PRO LOGIC

DTS NEO:6

5/7CH STEREO

MONO MOVIE

ROCK ARENA

JAZZ CLUB

VIDEO GAME

MATRIX