Denon AVR-3801 - Manual (Page 51)

50
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.
Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1 Select “FADER”.
CH.VOL
ENTER
SHIFT
(Main unit) (Remote control unit)
2 Press the D button to reduce the volume of the front
channels, the H button to reduce the volume of the rear
channels.
The channel switches in the order shown below each time
this button is pressed.
The fader function does not affect the SW channel.
BAND MODE
TUNING
TUNING
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
When EXT. IN is selected, the SW, SBL and SBR channel faders do
not function.
Dolby Surround Pro Logic mode
1 Select the Dolby Surround Pro Logic mode.
• The Dolby Pro Logic indicator lights.
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
This is only displayed when setting the fader control.
SURROUND
MODE
(Main unit) (Remote control unit)
DOLBY/DTS
SURROUND
Light
NOTE:
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3CH. LOGIC). The AVR-3801 sets the
mode automatically according to the types of speakers set
during the system setup process (page 18).
SURROUND
OUTPUT TEST TONE SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
STEREO
STEREO
DOLBY/DTS
SURROUND DSP
SIMU.
DIRECT
1
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
TUNER PHONO CD
RETURN SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
2
1
SELECT
SELECT
(Main unit) (Remote control unit)
FL C FR SR SBR SBL
SL SW FADER