Denon AVR-3801 - Manual (Page 52)

51
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1 Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 25).
FUNCTION
5
VDP
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or “DTS”.
AUTO DTS
MODE
(Main unit) (Remote control unit)
2 Select the Dolby/DTS Surround mode.
DOLBY/DTS
SURROUND
When performing this operation from the main unit’s panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro logic or DTS NEO:6.
SURROUND
MODE
3
Play a program source with the , mark.
DIGITAL
• The DTS indicator lights when playing
DTS sources.
(Remote control unit)
Light
Light
SELECT
1 2 3
4 5 6
7 8 9
+10 0 TV/
VCR
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-883
ON /
SOURCE
TUNER
VDP
VCR-1 VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
SURROUND
INPUT
OUTPUT TEST TONE SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG EXT.IN MODE
CALL 2 BACKLIGHT CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN SETUP
MENU
SHIFT
SURR.
PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
5, 6
4
2
3
1
1
(Main unit) (Main unit)
SIGNAL
DETECT
• The SIGNAL DETECT indicator lights
when playing sources on which a
special identification signal is
recorded.
Light
When the SIGNAL DETECT LED is lit, we recommend
turning the surround back channel using the 6.1/7.1
Surround button on the remote control unit and main unit
during playback.
• The Dolby Digital indicator lights
when playing Dolby Digital sources.
Operate the 6.1/7.1 Surround button to switch Surround Back
CH ON/OFF.
6.1 / 7.1
SURROUND
6.1 / 7.1
SURROUND
(Remote control unit) (Main unit)
SURROUND
BACK CH
OUTPUT
• Lights when the 6.1/7.1 Surround
mode is on.
Light