Code CortexOPOS - Manual (Page 6)

6
D008736_01 CortexOPOS User Manual
6.0 - Configuring a Code Reader for
USB Communication
7.0 - Configuring a Code Reader for
RS232 Communication
Scan the following barcode to configure the reader for OPOS
mode using USB communication. oTo restore the original
configuration, scan the “Reset to USB Factory Defaults”
barcode from the online configuration guide at
http://codecorp.com/ConfigGuide. Scan the following barcode to configure the reader for OPOS
mode using RS232 communication. To restore the original
configuration, scan the “Reset to RS232 Factory Defaults”
barcode from the online configuration guide at
http://codecorp.com/ConfigGuide.
USB OPOS/JPOS Mode RS232 OPOS/JPOS Mode
8.0 - CortexOPOS™ Device Manager
The CortexOPOS™ Device Manager provides options for more advanced configurations. If only one Code barcode reader will be connected to the
host computer, and it will be connected using USB, then the default configuration is all that is necessary. The CortexOPOS™ Device Manager
permits configuration of RS232 devices, multiple generic devices, or hardware-specific devices (one or more). All USB devices must either be
generic or hardware-specific; types cannot be mixed.