Codan Radio MT-4E Analog and P25 Digital - Maintenance Guide - Manual (Page 58)

MAINTENANCE GUIDE | MT-4E ANALOG & P25 DIGITAL RADIO SYSTEMS
Chapter 5: Codan Radio System Testing Page 50
Adjust until the RF error is as close to 0 Hz as possible as shown in Figure 5-38. Click on the “Program”
button to program in the new Reference Oscillator softpot value. The high and low alarms are turned
off.
Figure 5-38: Transmitter Reference Oscillator Measurement
Enter the Carrier Reference Oscillator Offset reading on the MT-4E Test Sheet.