Digital Stream DST-HD1100E - Manual (Page 6)

DST-HD1100E HDTV DIGITAL RECEIVER
6
Left/Right ANALOG-AUDIO OUTPUTS(with Analog Video Output)
Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs).
Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these
terminals when you use analog for video.
DTV OUT COMPONENT (Y, P
B
, P
R
format)
Connect to the Y-P
B
-P
R
digital video input of a digital compatible TV set (or the Y-P
B
-P
R
inputs of some other
video component).
SPDIF Output(Coaxial)
Connect this terminal to the digital audio input of a TV set.
SPDIF Output(Fiber optic connector)
Connect this terminal to the digital audio input of a TV set (i.e., to a TV set that has a fiber-optic connector
for digital audio). Or, connect this terminal to the digital audio input of a separate component (i.e., Dolby
Digital-AMP..).
PC Monitor Output (R,G,B FORMAT)
Connect to the R, G, B inputs of a TV set, computer monitor, or some other video component.
Upgrade Port (RS232C)
It is used for firmware upgrade. DO NOT USE THIS PORT AT ANY TIME!
Power Switch
Press the switch to turn the power on or off