Cloud Electronics WP-8W - Manual (Page 9)

WP-8 Installation Guide 9
First pass the CAT-5 cable through a suitable hole in the back box. Using an
IDC insertion tool, connect it to the 8-way IDC block as follows:
TERMINAL CAT-5 CORE
1 Brown
2 White + Brown
3 Green
4 White + Blue
5 Blue
6 White + Green
7 Orange
8 White + Orange
We recommend that some form of cable retention is employed to secure
the CAT-5 cable to the back box; a cable tie with an adhesive cable tie base
will normally be adequate. Stick the base to the inside of the box if there is
room, or to the rear of the box if it is of the cavity wall fixing type.