Cloud Electronics WP-8W - Manual (Page 8)

WP-8 Installation Guide 8
Installation
Mechanical
The Cloud WP-8 is designed to be wall mounted. It is the same physical size
as a UK-style single-gang electrical plate and can be flush-mounted in the
back box provided, or in a standard surface box with a minimum depth of
25 mm. Fixing screws are provided.
The WP-8A, the US variant of the WP-8, fits a standard US-style electrical
box.
Connections
The only electrical connection required is a single CAT-5 cable. This
is terminated on the WP-8’s rear PCB at an 8-way IDC (Insulation
Displacement Connector) connection block.
Note that the total cable run from the CAM-16 or CAS-16 to a WP-8 should
not exceed 100 m.