CITIZEN MG0000 - Manual (Page 99)

Transfer
AQUALAND GRAPH 2001 transfers data with Hyper Aqualand attached to the communication unit. Refer to the Hyper
Aqualand user's manual for information on using Hyper Aqualand.
1. Switch Hyper Aqualand to the transfer mode.
2. Operate Hyper Aqualand to call up the data to be transferred.
3. Insert the Hyper Aqualand transfer pin into the center connection pin of the three connection pins.
4. Data is sent from Hyper Aqualand when the button is clicked with the mouse, after which the personal
computer begins to receive that data. When transfer is completed, a dialogue box is displayed informing the user of
completion. If transfer has not been performed properly, a communication error warning message is displayed. If this
happens, check the connection of the RS-232C connector and the connection between Hyper Aqualand and the
communication unit. Then click the button again with the mouse.
5.When transferring different data, repeat the above procedure starting from step 2. If Hyper Aqualand is not in the
transfer mode, repeat the procedure starting from step 1.
28