Edit, Delete – CITIZEN MG0000 User Manual

Page 106

Dive Type

Select the dive type.

Ave. Depth

Enter the average depth as a numerical value.

Max. Depth

Enter the maximum depth as a numerical value.

Ave. w. temp

Enter the average water temperature as a numerical value.

Min.w. Temp

Enter the minimum water temperature as a numerical value.

S.I.Time

Enter the surface interval time in hours, minutes and seconds (HH:MM:SS).

Time In

Enter the dive starting time in hours, minutes and seconds (HH:MM:SS).

Time Out

Enter the dive ending time in hours, minutes and seconds (HH:MM:SS).

Dive Time

Enter the duration of the dive in hours, minutes and seconds (HH:MM:SS).

Data is registered by entering the required data and pressing the

button.

When registration is completed, a dialogue box is displayed asking whether or not an additional new log is to be created.

The program returns to the

if the

button is clicked with the mouse.

If the

button is clicked with the mouse, the program returns to the dialogue box.

The data previously entered in the dialogue box is displayed at this time.

6.2. Edit

The currently selected log is edited.

The dialogue box of the log that is currently selected is displayed when the

button of the

clicked with the mouse or when [Edit (E)] is selected from the [Files (F)] menu.

Although the basic procedure is the same as that for Add Log Data, the portion of the data that has been transferred for a log

that has been created by transferring data from the watch cannot be edited.

6.3. Delete

Log data that you want to delete is selected from the Diving List after switching the

to the Diving List.

The selected log data is deleted by selecting [Delete (D)] from the [Files (F)] menu.