CITIZEN MG0000 - Manual (Page 138)

2.4. Interface
This is for selecting the interface to be used when connecting with the watch.
9
The interface set with [AQUALAND GRAPH 2001] is used for communicating with the watch.
Although the interface can be temporarily changed here, the setting is not saved.
2.4.1 IrDA
Data is transferred from [CYBER AQUALAND] by IrDA.
• The display changes to the Infrared Communication Menu when the [MODE] button near the lower left corner of the Time
Display of [CYBER AQUALAND] is pressed for at least 2 seconds.
• When "to PC" is selected with the upper left [SEL] button and the upper right [SET] button is pressed, the watch is ready
to be connected with a personal computer.
• When the infrared communication unit of the personal computer is in contact with the watch in this state, [CYBER
AQUALAND] is able to communicate with the personal computer. The infrared communication icon in the task tray of the
personal computer changes as shown below.
• When the button is clicked with the mouse at this time, communication begins between [CYBER
AQUALAND] and the personal computer. When communication is completed, a dialogue box is displayed informing the
user of completion.
• When an infrared communication icon does not appear in the task tray, it means that the infrared communication function
has not been set. Set communications to infrared communication by referring to the user's manual of your personal
computer.
• Since the infrared communication function of [CYBER AQUALAND] is automatically canceled after one minute elapses,
set this function immediately before the start of communication.
2.4.2 USB
Data is transferred from [CYBER AQUALAND] by USB.
• The communication unit (CMUT-02) and personal computer are connected with the USB cable provided, and [CYBER
AQUALAND] is connected to the communication unit (CMUT-02).
• [CYBER AQUALAND] automatically displays the USB communication menu, after which it is able to communicate with
the personal computer.
• At this point, when the button is clicked with the mouse, data communication begins between [CYBER
AQUALAND] and the personal computer. Once transfer is completed, a dialogue box is displayed informing the user of
completion.
• If [CYBER AQUALAND] does not display the USB communication menu, after temporarily removing [CYBER
AQUALAND], disconnect the USB cable of the communication unit (CMUT-02), and repeat the procedure from the
beginning.