Directed Electronics SIR-WRS1 User Manual

Page 20

Problem

Suggested Solution (s)

(continued from previ-

ous page)

2 Reduce the distance between the Echo Transmitter and Echo Antenna, or ad-

just the location of one or both units until the signal strength on your SIRIUS

radio is good and the audio from it is acceptable. Materials used in the con-

struction of your home and/or proximity to other 900 MHz products may have

an adverse effect on the range of the SIRIUS Echo Signal Repeater System.

SIRIUS radio displays,

“Acquiring Signal”

1 Verify that the SIRIUS home antenna cable is connected to the Echo Transmit-

ter.

2 Verify that the AC Adapter is plugged into a working 110 volt AC outlet and is

connected to the Echo Transmitter.

3 Verify that all three green LEDs on the Echo Transmitter and the single green

LED on the Echo Antenna are lit.

4 Check the Antenna Aiming/Signal Strength display on your SIRIUS radio to

verify that you have at least six bars of SAT or TER signal. (See previous sug-

gested solution.)

SIRIUS radio displays

“Antenna Not Detected”

1 Verify that the cable from the Echo Antenna is connected to the SIRIUS radio

and that the single green LED on the Echo Antenna is lit.