Caple CR9105 - Manual (Page 16)

Conversion to Natural Gas or to LPG
Injectors replacement
Select the injectors to be replaced according to the “Table for the choice of the injec-
tors” (page 18).
If the injectors are not supplied they can be obtained from the“Service Centre”.
To replace the injectors:
– Remove the gratings, the burner and the covers;
– Using a wrench, substitute the nozzle injectors “J” (fig. 3.4 - 3.5) with those most
suitable for the kind of gas for which it is to be used.
The burners are conceived in such a way so as not to require the regulation of the
primary air.
Fig. 3.4
J
J
Fig. 3.5
16