Caple CAFF40 User Manual

Page 9

Installing the door handles

inner socket head cap

screw for handle fixing

chilling chamber door handle

inner socket head cap screw

for handle fixing

Installation process for the door handles

Difference between the

and refrigeration handle: lie them flat, the one with higher

freezer

chordal height is the refrigeration handle

Freezer

door handle

Refrigeration handle

Erection instructions

door handle:

for the freezer

Firstly, take the handle set bolts out from the refrigerator, use cross head

screwdriver

the door. Fix it tight with all the screw thread twisted

to tighten on to

through the hole, as shown in the figure;

After the first step is completed, take the

storage door handle out from the

Freezer

box, place it as per the direction shown in the figure (Note: i.e. the direction which

both screw holes on the handle are close to the edge), and hang the handle above
the set bolt;

Use the small hexagon spanner supplied in the box to set the handle fixing

socket head cap screws into both the small screwed holes on the handle. After they
are screwed down, gently shake the handle, so as to confirm that the handle is well

fixed.
Installation

instructions of the refrigeration door handle:

The

steps of the

door handle is same as that of the cold

installation

fridge

storage door handle. Please note that: during the

of the handle, the direction

installation

of tapping hole is downward (to the ground).

Energy saving tips and notices

Energy Saving Tips

The appliance should be located in the coolest area of the room, away from

heat producing appliances or heating ducts, and out of the direct sunlight.
· Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer. Foods that freeze
too slowly may lose quality, or spoil.
· Be sure to wrap foods properly, and wipe containers dry before placing them in
the appliance. This cuts down on frost build-up inside the appliance.
·

should not be lined with aluminum foil, wax paper, or paper

toweling. Liners interfere with cold air circulation, making the appliance less
efficient.
· Organize and label food to reduce

and extended searches. Remove as many items as needed at one time, and close
the door as soon as possible.

This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified persons in order to avoid a hazard.

– WARNING: Keep ventilation openings, in the appliance enclosure or in the built-

in structure, clear of obstruction.

– WARNING: Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

– WARNING: Do not damage the refrigerant circuit.
– WARNING: Do not use electrical appliances inside the food storage

compartments of the appliance, unless they are of the type recommended by
the manufacturer.

Do not store explosive substances such as aerosol cans with a flammable

propellant in this appliance.

This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type

environments;

– bed and breakfast type environments;
– catering and similar non-retail applications.

The storage areas

the number of times the doors are opened