Caple CAFF40 User Manual

Page 4

Before Using Your Refrigerator

Features
l

Stainless steel door panel

It is made with anti-fingerprint technology and has an elegant and
luxurious appearance.

Thermostatic freshness preservation technology

The refrigerator compartment is provided with independent air supply system and
independent temperature control system. It has constant storage temperature and
could preserve the freshness of food.

Efficient

system

humidity

The

maximum humidity

rate is as high as 80%, so it could preserve and prolong

the freshness of the stored food.

DC frequency conversion technology

The refrigerator is capable of automatic adjustment of the cold and efficiency of the
frequency-variable compressor according to the surrounding temperature, set
temperature, interior temperature, the temperature and amount of the stored food,
and it is

, good performance in freshness preservation,

has a quick freeze feature

high energy-efficiency and low

noise.

Intelligent

defrosting

The refrigerator is capable of

defrosting according to the actual frequency of

intelligent

use and frosting rate.
l

Dual system

The food

be stored in either the refrigerator compartment or the freezer

can

compartment to avoid tainting.

Key parts and components

The compressor is Embraco frequency-variable compressor, which

features are

high efficiency, energy saving and low noise.

Temperature-adjustable compartment

A temperature-adjustable compartment is set below the refrigerator compartment. It

can be set at

different temperatures according to the requirements of the food stored

here.
l

Ice maker

The freezer compartment is provided with an automatic ice maker, whose water
supply box is set in the refrigerator compartment. It is provided with water filter
blocks, which are capable of sterilization and removal of impurities. As a result, clean
ice is made.

Artificial intelligence

Performance according to the interior temperature and surrounding temperature
without the need of manual adjustment.

Large and luxurious design

The refrigerator is designed with

large

capacity for

both the

refrigerator

compartment and freezer compartment. The refrigerator compartment

has

adjustable cantilever shelves and has a big fruit and vegetable drawer.
--Free of Freon or frost, air-cooling refrigeration system, capable of cryogenic
treatment and quick freezing
--Automatic display of faults
–

alarm and large-screen LCD

Open door

--Four-door design,

for easy access.

excellent visibility

Warnings

Don't use mechanical equipment or other methods to accelerate the defrosting process

except the means recommended by the manufacturer.
l

Don't use any electrical appliances in the food storage compartments except the model

recommended by the

manufacturer

The R600a refrigerant and cyclopentane foaming material used in the refrigerator are

inflammable. All waste and discarded refrigerators shall be placed away from naked fire and
they are not allowed to burn.

Unpacking you new fridge freezer

Remove all packaging material before using the new refrigerator. This includes the foam

base and all adhesive tape holding the refrigerator accessories inside and outside.
l

Clean both the inside and outside of the refrigerator with wet cloth (a little detergent could

be added into the warm water to wash the cloth and then wipe it again with the clean water);
l

Prepare an independent two-pole socket with grounding contact for the refrigerator and it

should

not share a multi-purpose socket with other electrical appliances;

The grounding pole of the socket

be provided with a

must

ENSURE this product is earthed.

reliable grounding wire.
l

Open the refrigerator body and take out the accessory

(decorative cover for bottom beam) and the three
screws from the instruction packaging bag; then
install them into the bottom beam as shown by
the schematic diagram on the right.

Transport and Placing of Your Refrigerator
Transport
l

Keep upright and avoid squeezing or vibration during transport. Avoid a slant

angle over 45 degree during handling.

Avoid the door or top cap from being under excessive stress when moving;
otherwise, it may become deformed.

Placing
l

Place your refrigerator in a well-ventilated place and keep it from heat source

and direct sunlight. Don't place it in any humid or wet place so as to avoid rust and
weakening of insulation effect.

There must be a space not less than 30cm from the top of your refrigerator and
not less than 10cm from both sides or the back of the refrigerator to the adjacent
walls respectively. This

and

is required to allow the door to open and close fully.

also for heat emission.

The refrigerator should be placed on a flat and firm ground (if not flat, you can use
the leveling legs for adjustment).

Keep Your Refrigerator Standing
l

Don't connect your refrigerator to the power supply immediately after it is placed

vertically. You should keep it standing for at least 12 hours before switching it on in
order to ensure it runs well.

Note: Make sure the power wire is not

by the refrigerator

trapped or damaged

or other objects so as to avoid accidents arising from power wire faults. Please
check the voltage scope of your refrigerator against the actual power supply
before switching it on.

Note: The decorative cover for bottom
beam is used as

for decorative purposes only

so you can choose not to install it. It

will not

affect the refrigerator's performance or conditions
whether you install it or not.

Correct Use for Your Refrigerator

Screws

The refrigerator is capable of being adjusted automatially to the optimal

--Luxurious LED lamps on three sides in the refrigerator compartment

for

for bottom beam

Decorative cover