Campomatic PI200 User Manual
Page 6

5
PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
1. In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE OFF,
2. Press ALARM key again, LCD displays DATE ON,
3. Press SET key to quit.
NOTE: DATE OFF: Does not allow real time auto adjustment
REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS
¾ Reviewing
In on-hook state, press OUT key, then repeat to press OUT to review outgoing numbers one by
one.
¾ Calling back
1. In on-hook state, press OUT key to review the desired number, then press
key or pick up
the handset, and the number is dialed out,
2. Or press REDIAL key, LCD displays PICK UP, press
key or pick up the handset, the
number is dialed out.
¾ Deleting
1. In on-hook state, press OUT key to scroll to the desired number.
2. Press DEL key and the number is deleted, or
3. Press and hold DEL key for 3 seconds, all numbers will be deleted.
SETTING MENU
¾ Setting date & time
1. In on-hook state, press SET key, the value for the year flashes.
2. Press
Ÿ or ź key to edit the year.
3. Press
SET key to confirm and enter the next value month setting.
4. Repeat the year setting step to set the month.
5. Repeat the above steps for date and time setting.
¾ Setting Local Area Code and Long Distance Code
1. After setting up the date and time, press SET key. LCD displays CODE 0----- and the long
distance code “0” flashes,
2. Press
Ÿ or ź key to edit the flashing code from 0 to 9 or -.
3. Press SET key to confirm and enter the next flashing code setting.
4. Repeat the above steps for the rest code setting.
¾ Adjusting LCD Contrast
1. After setting up the local area code, press SET key, LCD displays LCD 08
2. Press
Ÿ or ź key to adjust the LCD contrast, total 16 levels can be selected.