BUG-O Systems Stiffener Welder - Manual (Page 9)

9
STIFFENER WELDER SUB ARC
Power Requirements: BUG-3170_* 120 VAC, 50/60, 1 PH
BUG-3172_* 240 VAC, 50/60, 1 PH
BUG-3174_* 42 VAC, 50/60, 1 PH
*Wire sizes available: .035, .045, .052, 1/16"
Kit Net Weight: 270 lbs. (123 kg) without wire
Shipping Weight: 365 lbs. (166 kg) without wire
STIFFENER WELDER MIG
Power Requirements: BUG-3180_* 120 VAC, 50/60, 1 PH
BUG-3182_* 240 VAC, 50/60, 1 PH
BUG-3184_* 42 VAC, 50/60, 1 PH
*Wire Sizes available: .035, .045, .052, 1/16", 3/32"
Kit Net Weight: 270 lbs. (123 kg) without wire
Shipping Weight: 365 lbs. (166 kg) without wire
STIFFENER WELDER FLUX CORE
Power Requirements: BUG-3200-_* 120 VAC, 50/60, 1 PH
BUG-3202-_* 240 VAC, 50/60, 1 PH
BUG-3204-_* 42 VAC, 50/60, 1 PH
*Wire sizes available: .068, 5/64", 3/32", 7/64", .120
Kit Net Weight: 264 lbs. (120 kg) without wire
Shipping Weight: 360 lbs. (163 kg) without wire
Travel Speed: 3-44 ipm (75-1100 mm/min)
Selectable carriage speed readout (in/min or cm/min)
Controls: • Manual or automatic wire feed. (Cold wire feed for setup).
• Independent left and right feed control.
• Crater fill time of 0-1.5 sec.
• ON/OFF Power Switch
• FORWARD/OFF/REVERSE Carriage travel direction
select
• CONTINUOUS/INTERMITTENT weld select
• Weld length timer 1-30 sec.
• Skip length timer 1-30 sec.
STIFFENER WELDER DIMENSIONS
40.625"
(1032 mm)
40.625"
(1032 mm)
17.500"
(445 mm)
16.625"
(422 mm)
39.625"
(1006 mm)
19.250"
(489 mm)
TECHNICAL DATA