BUG-O Systems PBM-2000 - Manual (Page 11)

11
C028180-594-20-00 BEVELING RADIAL CUTS R=3
Before beveling radial cuts, change the milling heads (25) for radial R3 milling set (part 68). After that place
the proper inserts for radial cuts B0908MK11 in sockets (Item 3 below). While changing the milling head,
you need to use the milling head puller (65), milling head interlock (64) and milling head fastening tool (62).
Before starting to bevel, remove the roller set (19) from the machine.
MILLING HEAD ASSY. / EXPLODED VIEW / PARTS LIST
ITEM PART NO. DESCRIPTION QTY
*1 C02180-594-01-00 Milling head arbor 1 Standard Equipment
2 PDK-0059-42-01-00-0 Distance ring 1 Radial R3 milling set
3 ZSP0075-46-00-00-0 Milling head w/o inserts 1 Radial R3 milling set
4 PDK-0059-42-03-00-0 Washer R3 1 Radial R3 milling set
*5 N18648-204-00-00 Safety washer 1 Radial R3 milling set
*6 N18647-804-00-01 Bearing nut KM-4 1 Standard equipment
*7 N18200-806-01-02 Cushion washer 1 Standard equipment
*8 N18230-206-30-02 Hex. Socket bolt 1 Standard equipment
**9 PLY-0075-00-05-00-0 Milling insert R3 6 Radial R3 milling set
*10 PLY-0075-00-05-00-0 Insert screw M6x.75x6mm 6 Standard equipment
*11 WKR-000027 Milling head key 1 Standard equipment
* Items included with machine (not part of R3 assembly).
** Items included with machine but also sold separately for replacement.
*
*
*
**
*
*
*
*