BUG-O Systems PBM-2000 - Manual (Page 10)

10
EDGE PLANING WITH SET 0°
To prepare the machine for planning, take the 15° - 60° slide off the machine and replace it with set 0°
(CO2180-753-20-01). After replacing, set width of cut “b” to 0" (0 mm) and continue working in the same
way as in regular beveling.
EDGE PLANING WITH SET 0° / EXPLODED VIEW / PARTS LIST
ITEM PART NO. DESCRIPTION QTY
1 C02180-753-23-00 Guide slide I 0° 1
2 C02180-753-23-10 Guide slide II 0° 1
3 C02180-753-40-10 Sliders mounting I 1
4 C02180-753-40-20 Sliders mounting II 1
5 C02180-753-07-30 Roller set 2
6 N18230-205-12-00 Hex. Socket bolt 12