BSS Audio FCS-966 Owner's Manual - Manual (Page 26)

6
10.0 Specifications
Specifications
General
Input Impedance 0kOhm balanced or unbalanced
Input Headroom >+0dBu
Max Output level >+dBu into 600 ohms or greater
Output Impedance <0 Ohms unbalanced or unbalanced
Frequency Response kHz +/-1dB
Noise <-9dBu 22Hz to 22kHz
Dynamic Range > dB
Cross Talk <-0dB @1kHz
Distortion <0.00%THD (80kHz measurement BW) 20Hz-20kHz, 0dBu
GAIN control +0dB to -infinity
HP filter control OUT to 0Hz @ 12dB/octave
LF contour +/-6dB shelving @ 50Hz 6dB/octave
HF contour +/-6dB shelving @ 14kHz 6dB/octave
FREQUENCY bands +/-dB on ISO centres with a Q of 4
HP filter set to OUT. Gain, HF, LF & all sliders set to 0.
Note that the filters are removed from the signal path when the slider is in the central 'zero' position.