Bronkhorst FLOW-BUS LabVIEW Driver - Manual (Page 8)

FLOW-BUS LabVIEW™ Driver Manual 9.17.078
Bronkhorst®
8
2.2 RS232/FLOW-BUS Interface
The RS232/FLOW-BUS interface is an interface between the FLOW-BUS and the RS232 V24 serial (computer) port. It will either be
supplied as a separate enclosed unit with a FLOW-BUS connector and a RS232 connector or as an integral 14TE module of your E-
7000 readout and control system. The converter offers communication with a baud rate up to 38400 baud. Communication
software support is available. Communication settings are: 38400, n, 8, 1.
Figure 3: RS232/FLOWBUS Interfaces
2.2.1 D-connector for RS232
The female RS232 (x) (sub miniature 9-pin) D-connector has the following pin configuration:
Pin number Description
1 not connected
2 TXD
3 RXD
4 not connected
5 0 Vd
6 DTR
7 CTS
8 RTS
9 Shield