Broadata Communications LBS-0808 - Manual (Page 5)

BCI LBS-08x08 User’s Manual
Link Bridge
TM Universal 8x8 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, (800) 214-0222 6
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1 POWER: Press this button to turn on the device or to set it to
standby mode.
2 CONFIG: Press this button to enter into the menu selections of
A. EDID Setting
Standard EDID: Use the built-in EDID which supports video
up to 1080p@60/WUXGA@60Hz.
Auto EDID: based on the TV/Display’s EDID
of the lowest connected output port.
Manual EDID: Support independent EDID by assigning the
selected input port to the selected output port.
B. IP Configuration
1. IP address,
2. Netmask,
3. Gateway.
C. Temperature
T1, T2: these figures shows the temperature inside the device.
D. LCD Contrast Range from 1~4
3 SAVE: Press this button to save the present setting of the I/O.
There are 10 pre-sets available for saving.
4 ALL: Press this button to select all outputs to one input.
POWER
LOCK UNDO RECALL ENTER 1 2
CONFIG SAVE ALL 1 2
3
3
4
4
5
5
6
6
7
7
8
8 OUT
IN
1 2 3 4
5 6 7 8