0 operation controls and functions, 1 front panel – Broadata Communications LBC-PSW84 User Manual
Page 6
LBC-PSW84 User’s Manual
Link Bridge
TM
Multi-format Presentation Switch
Broadata Technical Support, [email protected]
7
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1.
POWER: Press this button to turn ON the device and the LED
will illuminate.
2.
IR Window: This IR receiver receives only the remote control
signal from the packaged remote control.
3.
INPUT HDMI 1~4 & LED: Press the IN buttons to select an
input source signal from the 4 HDMI input sources to be
display for output ports. The LED will illuminate according to
the selection.
4.
BYPASS & LED: Press these buttons to select an input
source signal from the 6 input sources to be displayed for
BYPASS output port. The LED will illuminate according to the
selection.
5.
INPUT CAT5e/6/7 5~6 & LED: Press the IN buttons to select
an input source signal from the 2 CAT5e/6/7 input sources to
be display for output ports. The LED will illuminate according
to the selection.
6.
INPUT VGA & LED: Press this button to select VGA input
source signal to be display for VGA output port. The LED will
illuminate according to the selection.
7.
INPUT CV & LED: Press this button to select CV input
source signal s to be display for CV output port. The LED
will illuminate according to the selection.
8.
MENU: Press this wheel to enter into the menu and press it
again to confirm the selection.
1
2
3
5
6
7
8
9
10
4
4
3
5
6
7