Broadata Communications LBC-SPH4-1HB3-EIR User Manual

Page 8

Text mode
Original mode

LBC-SPH4-1HB3-EIR User’s Manual

Link Bridge

HDBaseT 3x Transmission System

Broadata Technical Support, [email protected]

4. CAT5e/6/7 OUT 1~3:

Connect to CAT5e/6/7 to HDMI Receivers (with or without PoH)
with a single CAT5e/6/7 cable each to extend the HDMI signal
up to 100m.

6. IR Extender:

Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.

MODE LED: This LED will illuminate when the power is connected.
LINK LED: This LED will illuminate when connected to a Receiver
unit that is connected to a TV/monitor that is displaying the signal.