Broadata Communications LBC-SPH4-1HB3-EIR - Manual (Page 4)

LBC-SPH4-1HB3-EIR User’s Manual
Link Bridge TM HDBaseT 3x Transmission System
Broadata Technical Support, [email protected] 5
1.0 PRODUCT DESCRIPTION
The LBC-SPH4-1HB3-EIR HDMI over HDMI and CAT 5e/6 Splitter can
split and distribute a single HDMI input, 2-way IR control and LAN
serving up to three CAT 5e/6 outputs and includes a simultaneous HDMI
bypass output. It supports resolutions up to 1080p Full HD, 4Kx2K
timing, 3D and multi-channel digital audio formats (such LBPCM 7.1Ch,
Dolby TrueHD, Dolby Digital Plus and DTS-HD). The HDMI bypass
output can be connected to an HDMI display or cascaded to another
splitter. The three CAT 5e/6 outputs can be connected to the CAT 5e/6
to HDMI receivers to extend the operating distance up to 100 meters.
Additionally the LAN connectivity will allow a 100BaseT network to be
served to smart TVs or game consoles. The PoH (Power over HDBaseT)
function can power compatible receivers, providing greater flexibility in
installations.
Features
• HDMI with 4K×2K resolution and 3D support, HDCP and DVI
compliant
• Simultaneous HDMI and CAT5e/6/7 outputs
• Supports data rate from 300 Mbps up to 3 Gbps
• Supports a wide range of PC resolutions from VGA to WUXGA
(RB) and HDTV resolutions up to 4K×2K (3840×2160@30 Hz
and 4096×2160@24 Hz)
• Supports transmission of High Definition audio: LPCM 7.1CH,
Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
(32 kHz~192 kHz sample rate)
• Supports distances up to 100 meters over CAT5e/6/7 cables
• Supports Ethernet network rates up to 100Mbps
• Supports selection of Standard or TV EDID settings
• Supports PoH with compatible receiver units
• Supports control of devices via 2-way IR
• 3D signal display is dependent on the TV/Display’s EDID settings