Broadata Communications LBC-SPH4-1HB3-EIR - Manual (Page 6)

LBC-SPH4-1HB3-EIR User’s Manual
Link Bridge TM HDBaseT 3x Transmission System
Broadata Technical Support, [email protected] 7
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1. HDMI IN:
Connect to HDMI equipped source equipment such as a DVD/
Blu-ray player or game console.
2. SYNC LED:
This LED will illuminate when the HDMI input is connected to a
HDMI source and receiving a signal.
3. HDMI OUT:
Connect to a HDMI display for local monitoring of the HDMI
signal or cascade to another Splitter.
4. HDMI LINK LED:
This LED will illuminate when HDMI output is connected to TV
or display monitor and receiving a signal.
5. EDID STD/TV:
The default setting is TV, when in this mode, the unit will detect
the EDID settings of the display device connected to the CAT
5e/6/7 Output 1. If it detects a 4K×2K capable EDID setting it
will transmit the signal in that format to the output port. If no
4K×2K capable EDID is detected then the unit will detect the
EDID settings and send out the signal that all outputs can accept.
This device has a last memory function and will retain the EDID
settings of the last device connected via the CAT5e/6/7 output
port when it is not connected to a display after power cycling.
Switch to the STD setting to use the unit’s built-in EDID if there
are display problems. In this mode, the video output will be set
to 1080p@60Hz and the audio at LPCM 2CH Stereo..