Blu Bathworks TSP421 - Manual (Page 3)

2013-07
1 866 907 0122 blubathworks.com
®
2
INSTALLATION
1) Thermostatic Body
• Insert the thermostatic body in the deck mount hole.
• Screw the upper and bottom ange to the body. See drawing below.
• Screw the exible pipe of hot inlet; screw the exible pipe of mix water; screw the exible pipe
of cold water. Remember to use the gaskets supplied
2) Diverter Body
• Insert the diverter body in the deck mount hole.
• Screw the upper and bottom ange to the body. See drawing below.
• Screw the exible pipe of the mix water, screw the exible pipe of the spout outlet, screw the
exible pipe of the hand shower outlet. Remember to use the gaskets supplied.
3) Spout Base
• Insert the spout holder in the deck mount hole.
• Screw the upper and bottom ange to the spout holder. See drawing below.
• Screw the exible pipe of the spout outlet. Remember to use the gaskets supplied.